Description
This exhaust system is part of our MIJ Performance Exhaust range — designed, developed, and hand-built in-house by our skilled technicians.
We don’t resell or rebrand generic systems — every exhaust is crafted to order using premium T304 stainless steel, ensuring a perfect fit, exceptional durability, and performance you can trust.
When you buy from us, you’re buying direct from the manufacturer, not a middleman.
Direct Fit Exhaust System For Corsa C
Designed to fit directly onto the cat
What you get: Front Pipe Including Flexi, Middle and rear sections of the exhaust
The twin tailpipes sit under the bumper so NO cutting or shaping of the bumper is required.
The middle section comes with or without the mid-silencer, you can let us know what you want by choosing the options from the drop down above.
With the mid-silencer you get a low-end mid-sport sound.
Or
if you want a grunt, you can have it without the mid-silencer giving you a sporty set-up that will definitely get you noticed!!
No gaskets are supplied only bolts and nuts so be sure to keep your old ones OR to source a new set prior to fitting this system.
What “Direct-Fit” Means
When we say Direct-Fit, we mean this system is designed to bolt or clamp straight onto your vehicle using the original mounting points — no cutting, welding, or modifications required.
This system replaces your middle and rear sections as one complete unit.
We do not sell this system as separate parts. It is sold as a full, complete exhaust system only, engineered and tested to work together as a matched setup.
REPLACE IT ONCE — NEVER AGAIN
This is our own brand exhaust system.
We are an established exhaust manufacturer — buy with confidence.
Key specs:
- Hand built in the UK to the highest standard
- Made from T304 stainless steel
- Anti-magnetic material
- Much less susceptible to rust compared to mild-steel systems
- Full-flow mandrel bends for excellent gas flow
- Free-flow design for increased power & efficiency
Why free-flow matters
All of our exhausts are free-flow systems — meaning minimal internal restriction.
Factory/OEM silencers contain chambers & baffles to reduce noise — this slows the gas speed and increases back-pressure.
Our systems remove these internal restrictions → improving exhaust velocity & engine breathing → resulting in measurable performance gains.
Each system is built & set up to suit this exact model, based on our own research, development, and test data.
Performance gains are noticeable on all our systems.
We don’t just replace an exhaust — we build an upgrade designed to be installed once and last.
Tips When Fitting
- Professional fitting is recommended for best alignment and long-term results.
• Do not remove your existing system until your new exhaust has arrived and has been checked against your vehicle.
• Always lay the new system next to the existing system to visually compare lengths, hanger positions and pipe routing before cutting anything.
• Ensure the vehicle is level when fitting — not half-raised on one side. Fitting at an angle can cause poor alignment, tailpipe twist, leaks and stress points.
• Loosely assemble all joints first — do not fully tighten clamps until the entire system is lined up, supported and sitting naturally in position.
• Once aligned, tighten clamps from front to back to avoid twist and movement.
• After initial fitting, re-check clamp tightness after a short drive — stainless steel expands and seats itself once heat cycled.
• We ship using third-party couriers, so delivery times can vary — please do not book workshop labour until you physically have the exhaust in your possession.
Shipping / Lead time
As we manufacture in-house, please allow up to 3 working days for production and dispatch (up to 5 days during busy periods).
We ship worldwide.
International buyers: Import duties/taxes are not included and are the buyer’s responsibility. Check with your customs office for estimated fees before ordering.
Buy with confidence from a well established exhaust manufacturer and supplier.
